Digital Gear Indicator for CRF250L CRF250M CRF 250 L M CRF250 L for Crossrunner for Fury for Stateline Motorcycle Accessories Gear Indicator Display Meter

Fitment:For CB300F 2015 - 2018For CB400SF 2008 - 2017For CB400X 2013 - 2016For CB400F 2013 - 2015For CB500F 2013 - 2018For CB500X 2013 - 2018For CB650F 2014 - 2018For CB1000R 2008 - 2018For CB1100 (non-ABS) 2010 - 2013For CB1100 (ABS) 2010 - 2013For CB1300 S/F 2003 - 2015For CBF600 2008 - 2012Description:Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inchInstallation:Find the RED,4-pole male diagnostic connector(DLC), usually near the ECU box,It may have a removable cap and may be partially covered by black tape.Steps:-You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear.-Raise the rear wheel off the ground by using a stand, and start the engine in Neutral. -the screen displays L, indicating that learning is started.- The screen displays L, select first gear, release the clutch, and keep the speed higher than the idle speed.- The display will flash "1";. Continue to maintain the first gear, accelerate. When the device is learning a gear, the display flashes faster.- When the display shows n, relax the handlebar accelerator.When the gear indicator changes from "n" to "2", the motorcycle immediately shifts into "2" gear, then continue to to refuel and accelerate slowly.- When the display shows n again, relax the handlebar accelerator again.When the gear indicator changes from "n" to "3",the motorcycle immediately shifts into "3" gear, then continue to refuel and accelerate slowly.Repeat this process until all gears are thought.In the gear, when learning sixth gear, the display will flash 6, accelerate until o is displayed, and then 6 will stay on and stop flashing. Indicates that the configuration is complete.The unit is programmed and should indicate the gears correctly.Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional.Package List:1 x Motorcycle Speed Gear DisplayHope you can buy your favourite products in the shop, welcome to the next visit.

• Application : Motorbike Display Tachometer Shift display For CRF250L CRF250M CRF 250 L M CRF250 L For Crossrunner For Fury For Stateline
• Function: Motorcycle Gear Display Gear Position Indicator The gear indicator display assembly that accurately displays the current gear number.
• Appearance: Motorbike gear display Indicator Shift Gauge It has a refined appearance, providing you with a better riding experience.
• Appearance:The motorcycle gear indicator has a beautiful appearance and provides you with a better riding experience.
• Installation:The light of the motorcycle gear indicator,quick and simple to install without complicated procedures.