Epson Ceiling Tile Replacement Kit for Projectors

The Epson V12H805001 is a ceiling tile replacement kit that makes it easy to install a compatible Epson projector in a room with a suspended ceiling grid.

The kit drops into an opening that measures two feet by two feet, the same size as a standard ceiling tile, so you can remove one panel and put this mount in its place.

Because the structure supports up to 250 pounds, it accommodates nearly every Epson projector found in classrooms, conference rooms, training labs, and other professional spaces.

Installation stays straightforward. After removing the tile, the panel sits inside the grid, then you attach the projector mount to the threaded insert and route power and signal cables through the space above the ceiling. No cutting or drilling is required, which saves time and keeps the ceiling looking intact.

The finish matches the white acoustic tiles found in many offices, so the panel blends in and draws little attention once the projector is in place. At only 1.1 inches high and 23.8 inches square, the kit leaves plenty of room for air circulation and cable management above the grid.

Whether you oversee audiovisual installations for a school district, set up equipment for corporate boardrooms, or need an orderly ceiling solution in a training facility, the Epson V12H805001 offers a reliable way to secure a projector while preserving a clean, professional appearance.

Highlights:

• Compatible with a wide range of Epson projectors
• Replaces a ceiling tile that measures 2 ft x 2 ft in a suspended grid
• Supports projectors and mounts up to 250 lb
• Panel with a low profile measuring 1.1 in high and 23.8 in square
• Installs without cutting the ceiling tile or grid